► FABRIC BUILDINGS


HOME         ABOUT US          TESTIMONIALS         CONTACT US         NEWS & EVENTS

PhD in structural engineering to customize projects to meet the customer's needs is possible

FABRIC COLORS


The covers for our fabric buildings are manufactured from a 14 oz rip stop polyethylene fabric with welded seams, and are available in the following UV treated colors:

Our fabric buildings can be mounted to many different foundation types to suit your needs. Both portable and permanent options are available. We can sell our buildings anywhere but our install service area is typically Atlantic Canada. We have crews across New Brunswick, Nova Scotia and Prince Edward Island on a regular basis and we also go to Newfoundland. We are happy to discuss options with you, please contact us.

USED BY MANY INDUSTRIES

• Agricultural and farming
• Commercial applications
• Government and municipal
• Equestrian buildings
• Construction
• Vehicle, boat and RV storage Military
• Sports and recreation

HUGE BENEFITS

• Green Construction - scrap or wasted building materials are minimal.
• Efficient Operation - daytime lighting is not required with a translucent cover.
• Quick Build Time - in most cases when your materials arrive the building can be erected in a week or two.
• Low Cost

DOME BUILDINGS

Cover-Tech Dome Style Buildings are designed to deflect rain and snow away from the building and to keep surface water runoff away from the interior. The light interior makes them energy efficient, and provides a natural and healthy environment. Cover-Tech fabric buildings are built in Canada to Canadian National & New Brunswick Building Code Standards, and are ISO 9001 and Canadian Standards Association (CSA) A660-10 certified for steel building systems. Our structural engineer can customize your project to meet your individual requirements.

Cover-Tech dome style fabric buildings are the most affordable design that come in sizes of 36', 40', 50', 55', 60', 62', 72' and 80' widths by any length. Cover-Tech provides design-built and engineered storage solutions as an excellent alternative for bulk storage, hay storage, livestock, riding arenas and much more.   

FEATURES:
  • 14oz reinforced polyethylene cover
  • 2.375" high tension galvanized steel frame that is reinforced with welded cross braces for extra snow load strength
  • Standard ratchet and pipe tensioning system for a drum tight cover
All dome buildings are backed by a prorated warranty against UV breakdown of 10-15 years. A custom color scheme provides a very attractive dome building. Color options are white, green, silver, beige and blue. 

If you don't see what you're looking for,
GIVE US A CALL 1-888-325-5757

REQUEST MORE INFO READ OUR TESTIMONIALS
Click view all to see more pictures under these pictures. Click each picture for larger view.

GOTHIC BUILDINGS

Click view all to see more pictures under these pictures. Click each picture for larger view.
Our Gothic Style Buildings are designed for applications where maximum height is a requirement. A perfect choice for bulk storage of salt, sand, grain, aggregate, fertilizer etc., this style is an industry leader for manufacturing facilities and equine applications.

If maximum side and center height is required then our gothic style buildings are right for you. Available in 62', 72' and 82' widths and any length. With a 12' high straight wall and a trussed frame, the gothic style is very popular for bulk storage and riding arenas.

FEATURES:
  • 14oz reinforced polyethylene cover
  • 2.375" high tension galvanized steel frame that is reinforced with welded cross braces for extra snow load strength
  • Standard ratchet and pipe tensioning system for a drum tight cover

If you don't see what you're looking for,
GIVE US A CALL 1-888-325-5757

REQUEST MORE INFO READ OUR TESTIMONIALS

STRAIGHT WALL BUILDINGS

Cover-Tech fabric buildings are buildings of high quality. Fabric buildings are very economical for storage and we have buildings for all uses. Our engineer has a PhD in structural engineering so customizing projects to meet the customer's needs can be provided.

The trussed frame straight wall buildings are available in 22', 32', 42', 52' and 62' widths by any length in a 10' multiple. Featuring all the storage benefits of a straight wall building, the trussed frame provides exceptional wind and snow load strength.

If you don't see what you're looking for,
GIVE US A CALL 1-888-325-5757

REQUEST MORE INFO READ OUR TESTIMONIALS
Click view all to see more pictures under these pictures. Click each picture for larger view.

SINGLE PIPE BUILDINGS

Click view all to see more pictures under these pictures. Click each picture for larger view.
The straight wall design allows you to get the most out of your building. With 10' high sides pallet stacking is no problem. This is the leading choice for warehouse applications.  
 
Specifications:
  • 14oz reinforced polyethylene cover
  • 2.375" high tension galvanized steel frame that is reinforced with welded cross braces for extra snow load strength
  • Standard ratchet and pipe tensioning system for a drum tight cover             

If you don't see what you're looking for,
GIVE US A CALL 1-888-325-5757

REQUEST MORE INFO READ OUR TESTIMONIALS

FOUNDATION OPTIONS

Cover-Tech Buildings can be mounted to many different foundation types to suite your needs.

BENEFITS OF COVER-TECH BUILDINGS

HIGHLY REINFORCED TRUSSED ARCHES

When designing the trusses of our Buildings the engineering team uses close attention to detail to ensure we have a superior product. With the combination of high tension galvanized steel, continuous webbing sections, vertical reinforcing pins and heavy duty joiner plates along with strict CWB welding procedures, our arches are an industry leader.
COVER-TECH INC. HIGHLY REINFORCED TRUSSED ARCHES

X-BRACE PURLINS

We are the first and only fabric building manufacturer using X-Brace purlins to connect our arches. All other companies use a single pipe purlin which only supports the bottom inside of the truss. With wind and snow loads this can allow the truss to twist. Our X-Brace purlin distributes snow load weight and wind pressure evenly to the entire truss resulting in maximum stability.
COVER-TECH INC. X-BRACE PURLINS

IN HOUSE TESTING

Each Building project is tested and inspected as per CSA A660 and CWB (Canadian Welding Bureau) requirements. We have an in house fabric testing lab in which fabric break strength, seam break strength and seam peel strength is tested for each and every building project. We also do burn tests to verify the fabric is flame retardant as per manufacturer’s specs.

In our steel fabrication shop we employee a full time CWB Certified Welding Supervisor to oversee the operation and ensure the welding procedures are followed, tested and inspected. We have quarterly audits by an external Welding Engineering firm to ensure our welds are in conformance with CSA Standards and we have quarterly audits by the CWB (Canadian Welding Bureau) to ensure all welding procedures are properly implemented.    

STRUCTURE FABRIC

With providing more than 50,000,000 square yards of fabric for frame supported structures in the last FIVE years alone, NovaShield™ from IPG, is designed to meet the industry’s highest standards, and is the proven material for sound fabric clad buildings in all climates.
NOVASHIELD BRAND LOGO
NovaShield Membrane Structure Fabrics
Our patented weave produces impressive strength-to-weight ratios and its lighter weight makes for easier, faster, money-saving installations. NovaShield features excellent physical properties, wider widths and better color retention than comparable products.

IPG offers a range of durable membrane structure fabrics which ensures you have the right fabric for your unique needs.

NovaShield Membrane Structure Fabrics advantages include:
  • Range of colors
  • Industry leading warranties
  • Improved fungal resistance
  • Engineered coatings provide exceptional performance properties
  • Technologically designed to stand up to some of the most demanding weather conditions
  • Durability & Safety
IPG is the only polyethylene membrane manufacturer to successfully combine long-life UV resistance with flame retardancy. NovaShield products pass the most demanding certification standards, including:
  • California Fire Marshall
  • ASTM E84 (Class 1)
  • NFPA 701 (Large and Small Scale)
  • CAN/ULC S-109 (Large and Small Scale)
  • UBC31-1
  • FAR 25.863(a) Appendix F, Part 1
  • EN13501.1 (B.s1.d0)
  • DIN4102 (B1)

ENGINEERING

Engineered, Manufactured and Installed to Strict Quality Guidelines.

We are leading designer, manufacturer and installer of tension fabric buildings, has achieved recognition through the Canadian Standards Association (CSA) A660-10 certification program for steel building systems.

The CSA-A660-10 standard requires that steel structure manufacturers comply with the applicable engineering criteria and building codes. It was also developed to assist code enforcement officials in reviewing submissions for building permits incorporating a steel building system, and to help purchasers obtain a quality building. To be certified, building manufacturers must maintain production facilities, staff and quality assurance systems that are consistently capable of producing quality steel buildings. To ensure these design and production standards are met, the CSA-A660-10 standard requires a manufacturing facility to obtain documented approval from a licensed professional engineer. We have also obtained the S367-09 standard which has to do with assembly of the fabric itself. Several tests and record keeping of the seam strength and material strength are required for this standard to assure customers of a safe, quality product.
QUASAR CERTIFIED CSA A660 PICTURE LOGO
The Canadian Welding Bureau (CWB) has certified our manufacturing facility to CSA Standard W47.1 “Certification of Companies for Fusion Welding of Steel” in Division 2. Division 2 requires that we retain the services of a qualified Welding Engineer a Certified Welding Supervisor is on staff to control welding operations. CWB qualifies Welding Supervisors based on related experience, and examinations on welding symbols, weld faults, quality control and inspection methods. The welding operation is subject to third-party audits by CWB to assure continued commitment and performance to required standards.
CWB THE CANADIAN WELDING BUREAU LOGO
ISO 9001:2008 sets out the criteria for a quality management system and is the only standard in the family that can be certified to. This standard is based on a number of quality management principles including a strong customer focus, the motivation and implication of top management, the process approach and continual improvement. Using ISO 9001:2008 helps ensure that customers get consistent, good quality products and services.
ISO 9001:2008 LOGO
The New Brunswick Construction Safety Association (NBCSA) are committed to helping employers and workers reduce losses caused by workplace injuries through the “Certificate of Recognition” (COR) program for the New Brunswick construction industry. The COR, along with a Letter of Good Standing is also used as a pre-qualification requirement for Contractors tendering work for many buyers of construction. The Certificate of Recognition program is available to all Members and Associate Members of the NBCSA from small to large companies and is administered by the New Brunswick Construction Safety Association.  
The New Brunswick Construction Safety Association (NBCSA) LOGO
Share by: